Enerpac XC-Series Instruction Manual download pdf (Page 2)

General Safety

Never set the relief valve to a higher pressure than the maximum

rated pressure of the pump. Higher settings may result in equipment

damage or personal injury. Do not remove relief valve.

To avoid personal injury keep hands and feet away from cylinder and

work piece during operation.

Do not handle pressurized hoses.

Escaping oil under pressure can penetrate the skin, causing serious

injury. If oil is injected under the skin, see a doctor immediately.

Do not pressurize disconnected couplers.

Safety First

Read all instructions, DANGER, WARNING and

CAUTION paragraphs carefully.

Follow all safety precautions to avoid personal

injury or property damage during system

operation. Save these instructions.

ENERPAC cannot be responsible for damage or

injury resulting from unsafe product use, lack of

maintenance or incorrect product and/or system

operation. Contact ENERPAC when in doubt as

to the safety precautions and operations

Conformance to

National & International

Standards.

We declare that this product has been tested

and conforms to applicable standards and is

approved to carry the CE, TUV C and US, and

FCC certiﬁcation marks. An EC Declaration of

Conformity is enclosed separately.

Model / Serial Number

The model and serial number are found on the

back side of unit, above the battery area.

Important

Danger icons are only used when your action or lack

of action may cause serious injury or even death.

Failure to comply with DANGER, WARNING or CAUTION statements

could cause equipment damage and personal injury.

General Safety 4

Electrical Safety 6

Installation 7

Use 8

Operation 9

Disconnecting 10

Oil Fill 11

Pressure Setting 12

Technical Speciﬁcations 13

Troubleshooting 14

Contents

1 2 3 4 5 6 7 ... 13 14

Comments to this Manuals

No comments

Enerpac XC-Series Instruction Manual Page 2

Comments to this Manuals

Related products and manuals for Water pumps Enerpac XC-Series